Return to Previous Page

RT series Reverse Osmosis System



RT series reverse osmosis system are designed for treating low to moderate TDS feedwaters encountered in municipal supplies, dam and river waters, bore and brackish water sources. These basic systems are designed to be simple to install, operate and require little maintenance. A membrane flush facility is standard and operates each time the system is started to assist with keeping the membranes clean. Continual monitoring of feedwater pressure, RO permeate quality and storage tank level is performed by the integrated microprocessor based controller. AIR ATOM‘s Reverse Osmosis systems are capable of removing salts as well as other impurities such as bacteria, sugars, proteins, dyes and constituents having a molecular weight greater than 150-250 dalton


Category: .
  • Description

    Product Description

    Product Features

    ** High pressure stainless steel membrane housing
    * Low Energy TFC spiral membrane
    * High Pressure Schedule 80 pipe work
    * Anti-corrosion multistage pump
    * Microprocessor controller with TDS readout
    * Automatic flush with raw water
    * Low feedwater pressure sensor
    * Storage tank level sensor input
    * Permeate and reject flow rotameters
    * Adjustable pressure regulator valve
    * Liquid filled pressure gauges (Filter Feed, RO Feed)
    * Concentrate recycling valve
    * Electro-polished stainless steel frame
    * Powder coated control panel with power supply provisions for pre-filtersSpecifications

    Specifications \ Models RT 1500 RT 3000 RT 4500 RT 6000 RT 7500 RT 9000
    Permeate Flow GPD / LPH 1500 / 250 3000 / 500 4500 / 750 6000 / 1000 7500 / 1250 9000 / 1500
    Module Qty & Size (1), 4″x40″ (2), 4″x40″ (3), 4″x40″ (4), 4″x40″ (5), 4″x40″ (6), 4″x40″
    Nominal Recovery 50%
    Motor (kw) 0.75  2.25 2.25 2.25 3 3
    Weight (kg) 43 43 43 43 43 43
    Dimension (mm) 530 x 530 x 1150

    Feed Water Requirments
    pH: 3.0 : 10.0
    TDS: < 2,000 ppm (choose BW systems when exceed)
    Turbidity: < 1.0 NTU (required pre-treatment when exceed)
    SDI: < 5.0 (required pre-treatment when exceed)
    Hardness: < 50 ppm (required pre-treatment when exceed)
    Residual Chlorine: < 0.1 ppm (required pre-treatment when exceed)

    Feed water quality, pressures and flow rates have a significant impact on the performance of any reverse osmosis system. To ensure reliable and consistent long-term performance, it is important to supply feed water having the minimum specifications detailed below. If your feed water supply is marginal, you should consider using a feed water break tank and booster pump to supply the system.

     

    Enquiry

    Your Name (required)

    Your Email (required)

    Subject

    Enquiry details:

    Incoterm

    Payment

    Your Message

Kontak cepat : +62-8181-31121